120cm 3 Seat Belt Bed Frame Upholstered
Current lead time on bed frames is approx 4 weeks from order.
Please contact us to discuss your choice of upholstery design and to request material samples.
Our beds are all made to order by our experienced fabricators who share pride in our product. We work hard to ensure our customers receive a quality bed which suits there needs and fits their vehicle. You will find several options when purchasing to personalise your bed to meet this goal.
Bed Size - The frame width is 110cm and made for cushion sizes between 120-130cm wide
Seat Belts - 3 sets of seatbelts are supplied pre fitted to bed frame
Wheel Arch Height - Wheel arch allowance is 33cm. This size will fit most vehicles including VW T5/T6, Transit, Vivaro and variants. There is also an option for 36cm which is better suited for the Transit than the 33cm though both will fit. Please note Portable toilets will not fit under our bed frame.
All our beds are of a cantilever design. This means there are no legs as per a common Rock and Roll Bed. There are several benefits which are the floor of your vehicle cannot be damaged when opening the bed and area in front of bed no longer has to be clear to use giving obvious advantages on other designs. The cantilever design is also very strong and quiet, we utilise 12 x 30mm bearings and even when fully extended will withstand considerable weight at the end point.
Self Closing System - This system takes all the hard work out of putting your bed away. The bed is locked in the fully flat position. Once unlocked the bed will return to the seating position without any input from the user. A 800N strut is fitted to bed frames as standard, if you find strut is not suitable for your upholstered bed alternative struts from 500N to 1200N can be purchased in our store to suit your finished bed.
Electric - The design of our frames lends perfectly to an electric system. We utilise powerful actuators sourced from a British Company along with hand held remote. At the press of a button on the remote the bed can simply be opened or closed in around 15 seconds.
If purchasing a bed for a VW we can supply an M1 Tested Subframe to fit under the vehicle and secure bed too. This is optional for fitting the bed as fixings holes in bed frame are located in line with the chassis beam of the vehicle making standard fitting more than adequate.
M1 Tested with certificate
5 Reclinable positions
Fitting kit with 120mm x 25mm x 8mm spreader plates included
Base width 82cm
Bed width 110cm (120-130cm Upholstered)
Bed length 180cm
Seat depth 99cm
Wheel arch height 33cm (Other sizes available for other vehicles)
Bed Frame weight 68Kg